How Much Do CFMoto Snow Plows Cost?
Sep 22nd 2026
Pairing a plow with a CFMoto UForce 1000 turns an already capable work stud into a full winter tool, and the price of doing it is easier to pin down than what you might expect. Across the eight complete kits below, prices start at $749.99 for Denali’s Standard Series and top out at $1,669.87 for a Moose V-Plow. Half of them cost less than $850. Add-ons in our grid range from $34.95 to $69.99, and a winch still has to be purchased on its own.
Every kit below lists a UForce 1000 fit, but the U10 Pro and the smaller UForce models do not always share its mount. Shop by machine on our UForce snow plow page.
Choosing a UForce Snow Plow Blade
Word to the wise: wider is not automatically better in every case. Our UForce buyer’s guide points out that a 66-inch KFI Pro-Poly blade already reaches the edge of a UForce 1000 when set square to the machine. Go to 72 inches if you plan to plow at an angle much of the time, since angling pulls the ends inward. Here is what each kit offers:
- Denali Standard Series: a deep-scoop steel blade in the three common widths
- Open Trail: your pick of plain steel or a poly hybrid, same three widths
- KFI: Pro-S steel or the Pro-Poly face our guide mentions above
- Eagle Plow: charcoal steel sizes plus a black blade that stretches to 80 inches
- Moose poly: high-density poly on steel ribs in 60- or 72-inch widths
- Denali HD Poly: poly construction, offered at 66 and 72 inches wide
- Kolpin Conqueror: steel in three sizes up to 72 inches, or poly as wide as 84
- Moose V-Plow: a two-wing V at 72 or 82 inches
CFMoto UForce Snow Plow Kit Prices
Prices below reflect the base listing, and whatever blade, push tube and options you pick on the product page change the total. Three kits carry a shared freight fee: Open Trail at $49.99, the Conqueror at $59.99 and Eagle at $149.99.
| Kit | Brand | Blade sizes and material | What is in the box | Starting price |
|---|---|---|---|---|
| CF Moto UForce 1000 Standard Series Snow Plow Kit by Denali | Denali | 60, 66 or 72 inches, 11-gauge steel | Blade, push tube and a laser-cut UForce 1000 mount | $749.99 |
| CFMoto UForce Complete Snow Plow Kit by Open Trail | Open Trail | 60, 66 or 72 inches, steel or poly hybrid | Blade, push tube and a mount for your UForce model | $764.99 |
| CFMoto UForce 1000 Heavy Duty Complete Snow Plow Kit by KFI | KFI | 60, 66 or 72 inches, Pro-S steel or Pro-Poly | Blade, Pro 2.0 push tube and UForce 1000 mount | $779.95 |
| CFMoto UForce Straight Blade Front-Mount Complete Snow Plow Kit by Eagle Plow | Eagle Plow | Charcoal steel to 72 inches or 80-inch black | Straight blade, push tube and front mount plate | $849.95 |
| CFMoto UForce 1000 Poly Plow Blade Snow Plow System by Moose | Moose | 60 or 72 inches, poly face on steel ribs | Poly blade with flap, push tube and pull-pin mount | $923.99 |
| CF Moto UForce 1000 HD Poly UTV Complete Snow Plow Kit by Denali | Denali | 66 or 72 inches, poly | Poly blade, push tubes, wear bar and skid feet | $929.00 |
| CFMoto UForce 1000 Conqueror Front-Connect Snow Plow Kit by Kolpin | Kolpin | Steel from 60 to 72 inches, poly to 84 | Blade, front-connect push frame and bumper mount with a 2-inch receiver | $974.99 |
| CFMoto UForce 1000 V-Plow Complete Snow Plow System by Moose | Moose | 72 or 82 inches, V-blade | Twin V-blades, push tube and bottom mount, rubber flaps included | $1,669.87 |
UForce Snow Plow Add-Ons
A winch is what raises and lowers nearly all of these blades. Something in the 2,500 to 3,500 lb range handles plowing alone, while 6,000 lb makes sense if the same winch does recovery work in summer. See our UForce winches. The cable matters too, because a stock fairlead roller is small and can flatten steel cable over a season of lifts.
| Add-on | What it does | Price |
|---|---|---|
| CFMoto UForce / ZForce Plow Fairlead Pulley (Standard) by KFI | 2-1/8-inch roller that swaps in for the stock fairlead in plow season, steel cable and standard 4.875-inch winches only | $34.95 |
| CFMoto UForce / ZForce Heavy-Duty Snow Plow Blade Skid Shoes Pair by Kolpin Powersports | Pair of 7mm steel shoes that take the ground wear, Kolpin blades only | $57.99 |
| CFMoto UForce/ZForce Snow Plow Pulley Fairlead Kit by MotoAlliance | Roller, pulley and 12-foot dyneema line for steel or synthetic cable, standard or wide spool | $64.99-$69.99 |
UForce Snow Plow Fitment for Lifts, Tracks and Mounts
Lifted UForce Plow Setup
Once the UForce sits taller, expect the blade to tilt forward or back unless you correct it. The KFI and Open Trail listings both offer leveling kits for -1 up to +6 inches of lift, and Open Trail adds a separate kit for 2-inch forward setups. Denali sells push tubes with 2 or 4 inches of built-in lift for machines riding 13 to 17 inches off the ground.
Tracked UForce Plow Setup
With tracks installed, the blade has to sit farther out so it clears them in a turn. KFI and Open Trail each sell a bracket that adds 10.33 inches, and Eagle, Kolpin and Denali offer longer push tubes. One catch on the Denali side: its extended push tubes do not work with the Hydro-Turn, so a tracked UForce on a Denali plow gets manual angling only.
UForce Plow Mount Differences
The mount is where UForce models split apart. Open Trail uses different mounts for the UForce 1000 and the U10, while Eagle lists no U10 option at all. The UForce 800 XL shares a mount with the UForce 600 on Open Trail kits, not with the standard 800. Open Trail also calls for the stock front bumper. Send us your model and year and we will confirm the match.
More Winter Gear for a UForce Snow Plow Setup
- Windshields: snow thrown off the blade has a way of ending up on the driver
- Cab enclosures: keep wind off your back through a long morning of plowing
- Heaters: work best in a sealed cab, so plan the two together
- Tires: a fresh, aggressive tread helps the UForce keep pushing on packed snow
When to Order a UForce Snow Plow Kit
From November into January, freight and lead times have a way of stretching out. Ordering by early fall gives you time to install and test before the first storm. You can pull up the install instructions on most of these product pages before you buy.
The most common warranty is between 3-6 months, but Everything CFMOTO Offroad does offer extended 1- and 2-year warranties on all products if that is something you are interested in — you can add the extended warranty right at checkout.
Our team answers texts at (920) 644-5280 and calls at (920) 888-2040, open 8 to 6 on weekdays and 9 to 3 on Saturday, CST. Share your UForce model and year, plus any lift or track setup, and we will point you to the right kit.
